途稳节能

搜索
产品中心
Product Center
位置:
首页
/
/
/
病原微生物检测车

病原微生物检测车

病原微生物检测车具有较强的机动性和环境适应性,主要用于地震、洪水、火灾、台风、千旱、冰雪等重大自然灾害灾区现场环境、媒介生物、饮用水、食品等样本的病原学和卫生学指标检测,重大突发公共卫生事件和大型活动保障生物安全方面的现场检测需要。主要为各地疾控中心提供机动检测服务,湖北疾控中心的检测车就是公司技术团队研发生产的,为新冠肺炎疫情的防控助力;
所属分类:
检测车系列
咨询热线Hotline: 13760960168
病原微生物检测车
产品描述

病原微生物检测车

Pathogen detection vehicle

 

病原微生物检测车

 

1、功能及用途

1、Function and purpose
       病原微生物检测车具有较强的机动性和环境适应性,主要用于地震、洪水、火灾、台风、千旱、冰雪等重大自然灾害灾区现场环境、媒介生物、饮用水、食品等样本的病原学和卫生学指标检测,重大突发公共卫生事件和大型活动保障生物安全方面的现场检测需要。主要为各地疾控中心提供机动检测服务,湖北疾控中心的检测车就是公司技术团队研发生产的,为新冠肺炎疫情的防控助力;
       With strong mobility and environmental adaptability, the vehicle is mainly used to detect the pathogens and hygieneindexes of the samples of the environment, vector organisms, drinking water and food in the disaster areas caused by majornatural disasters, such as earthquake,flood,fire, typhoon, drought,snow and ice.Major public health emergencies and large-scale activities to ensure the biosafety of on-site testing needs.It mainly provides mobile detection services for centers for disease control and prevention. The detection vehicle of hubei center for disease control and prevention was developedand produced by the technical team of the company to assist in the prevention and control of covid-19 epidemic.

2、符合以下设计标准要求

2、Meet the following design standards

GB19489-2008       《实验室生物安全通用要求》

wS233-2017         《病原微生物实验室生物安全通用准则》

GB 50346-2011      《生物安全实验室建筑技术规范》

GB1589-2016        《道路车辆外廓尺寸、轴荷及质量限值》

GB 7258-2017       《机动车运行安全技术条件》

GJB5113-2012       《后勤箱式车通用规范》

ISO 1590: 2003(E)  《医学实验室一安全要求》

wHO《实验室生物安全手册》

 

病原微生物检测车

 

3、主要组成

3、Main components
       主要由底盘、裙边箱、保温隔热箱体、空调送风净化系统、电气系统、控制系统、车载型生化实验设备、灭菌装置和实验台等组成。

lt is mainly composed of chassis, hemline box, heat insulation box, air conditioning air purification system, electrical system, control system, vehicle-mounted biochemical experimental equipment, sterilization device and experimental bench.

4、主要技术指标

4、Main technical indicators

4.1、工作环境要求

4.1、Requirements of working environment

产品应考虑日照、雨雪和风砂等气候的影响,箱体在下列环境下应能正常工作,不得有脱层、变形或损坏,密封条、密封剂不应失效,不应出现镀层脱落及明显腐蚀等。

工作环境温度: -25℃~+46℃,适应我国严寒地区、寒冷地区、夏热冬冷地区、夏热冬暖地区和温和地区五个典型地区。储存极限温度:-40℃~+60℃;

箱体内所有零、部件均应具有适应相对湿度95%环境条件的能力,金属件不应锈蚀,涂层不应破坏;

可承受地面稳定风30m/s以上;

车外设备及整车应能承受强度为不小于1120W/m'的太阳辐射,外表面材料应能承受稳态长期自然光化学效应。

The product should consider the influence of sunshine, rain, snow and wind sand and other climate, the box body shouldbe able to work normally in the following environment, there should be no delamination, deformation or damage, seal strip,sealant should not fail, should not appear coating off and obvious corrosion.

Working environment temperature: -25%℃ ~ +46C, suitable for China's cold region, cold region, hot summer and coldwinter region, hot summer and warm winter region and mild region five typical areas.Storage limit temperature: -40°℃~ +60°℃;

All parts and parts in the box shall have the ability to adapt to 95% environmental conditions of relative humidity. Themetal parts shall not be corroded and the coating shall not be damaged.

Can withstand the ground stable wind above 30m/s;

The external equipment and the whole vehicle shall be able to withstand the solar radiation with the intensity no lessthan 1120W/mt , and the external surface material shall be able to withstand the steady and long-term natural photochemicaleffects.

 

4.2、实验室功能参数

4.2、Laboratory function parameters

可移动的P2S实验室功能,能有效开展各类样本的病原学和卫生学指标检测,环境条件符合检测质量控制与生物安全的要求。根据国家行业标准,实验舱内建立负压-25Pa;进入试验区的缓冲区必须是正压10Pa;

The function of portable P2S laboratory can effectively carry out the detection of pathogens and hygiene indexes of alkinds of samples, and the environmental conditions meet the requirements of detection quality control and biosafety.According to the national industry standard, negative pressure -25pa is established in the experimental chamber The bufferinto the test area must be positive pressure 10Pa;

病原微生物检测车


部分实物照片见下:Some of the photos are as follows:

病原微生物检测车

病原微生物检测车

病原微生物检测车

病原微生物检测车


定制车载型生物安全柜、生化培养箱,抗震耐颠更耐用
Bespoke vehicle-mounted biosafety cabinet and biochemical incubator, more durable against shock and shock

关键词:
广东途稳节能移动装备
专用车
电源车
发电车
检测车
下一个
获取产品报价
我们的工作人员将会在24小时之内(工作日)联系您,如果需要其他服务,欢迎拨打服务热线: 13760960168
全部评论
已有0条评论
暂时没有内容信息显示
请先在网站后台添加数据记录。
途稳节能

全国服务热线:

联系我们

联系人:陈先生 13760960168
邮箱:chenxiaoming@tourwin.com.cn
传真:0757-25520676
地址:佛山市顺德区勒流街道办事处众涌村委会众富路13号之二

途稳节能的急救医疗车更方便救治病人

移动手机网站

途稳节能

立即联系

Copyright ©  2021   广东途稳节能移动装备股份有限公司  网站建设:中企动力 顺德   粤ICP备2021113873号